You are here

KXTD Programmator, version 1.32.2

KX-TD PBX
KX-TD Programmator supports following models: Panasonic KX-TD1232/KX-TD816/KX-TD308. It also may be used with KX-TA1232 PBX. Easy understandable interface and built-in installer's help-file let you to config and to program your PBX even without PBX Installation Manual.

To connect KX-TD PBX you will need null modem cable.
Null-modem cable
For ready cable search Google for "null modem cable +DB25M purchase".
Attention! Cable has different connectors of 'female' and 'male' types (DB-9F and DB-25M). It is VERY IMPORTANT to use 'full-handshaking' null modem cable - otherwise it will not be possible to connect KX-TD PBX!

If the computer is not equipped with serial COM-port (as many moderm laptops) then "USB to Serial Converter" may be used - for example, see TRENDnet USB to Serial Converter TU-S9

How to check the RS232 cable
A null modem cable is required - see the help file for the interconnection diagram.

The easiest way is to try to connect the Programmator to the PBX. If it didn't work, then you can:

  • check the cable with an ohm meter and compare with the wiring diagram
  • try to get a call log from the station. To do this, you can use any terminal emulation program (for example, PuTTY ; no installation required) and set exactly the same settings in it (port number, speed, parity, etc.) that are used in the station.
    If unsure, try 9600, 8, 1, MARK
    That's it - now you have to wait. After completing the next call (outgoing), you should see something like this line:

    8/31/05 11:36 AM 24 02 555125737 00:00'15" ….

  • if, instead of a neat line, 'garbage' symbols appeared on the screen, then the cable is working properly, but you made a mistake with the port settings

if there is nothing at all, check the cable (and settings).

Sample screenshot (click to enlarge):

KX-TD Programmator


Try Programmator yourself - click here to download.

How to buy?
Using secure ShareIt! service, the price is $49